RailDriver Desktop Train Cab Controller (輸入版)

FREE Shipping

RailDriver Desktop Train Cab Controller (輸入版)

RailDriver Desktop Train Cab Controller (輸入版)

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods


The above menu lists which locos you have. You can filter them according to country and motive power. Most (but not all) loco images have a small train icon to the bottom right.

TR Forums • View topic - TrainSim Fans: RailDriver Desktop Train Cab Controller". techreport.com . Retrieved 2009-01-24. Perhaps one of the most important things to remember is that steam locomotives need a certain level of steam pressure to provide enough power to pull the train.Yes. In the case of trains or locos with separate throttles, such as a sprinter or a Class 37, the handle will control the throttle only and fit to the relevant notches on the controller.

Kuju Announces Rail Sim Peripheral Deal News - TotalVideoGames.com". www.totalvideogames.com . Retrieved 2009-01-24.Also any software suggestions for mapping anything to keys or connecting TS with my controllers would be nice. I started small with a couple of buttons and some hand held squeegee handles attached to some rotary pots before attempting the final job.

This is the gauge you need to keep an eye on to ensure that steam pressure is not falling too low - or your train will simply slow to a halt. Hopefully, you will now be able to start the game. If so, set the graphics to default. Save the settings and exit the game. Generic gamepads' like your unofficial one (most likely) will work, but sometimes there might be issues with individual controllers. Throttle and Reverser - Features a gated dynamic brake and a continuous reverser with three positive stops.


Start learning how to program arduino or similar controllers; then once you get that, start adding a couple of buttons, the same type you find for arcade (they are big and either round or square shaped, so they look like train buttons, plus they have LED inside to light up). Many people choose to launch the game directly from the desktop, without starting Steam. This saves some system memory which would otherwise be used by the Steam interface. Once your train is running at a decent rate, it is a good idea to reduce the levels of both the regulator and the reverser as far as you can without losing speed. These levels will vary for different locomotives. You will need to get just the right combination of regulator and reverser for the steaming conditions at hand. In some locos with an average load, for example, speed may be maintained with the regulator set at 28% and the reverser set at 18%. You will need to experiment to find the best combinations for your loco and the conditions under which it is operating (going up a hill, accelerating, coasting or slowing down etc.). MSTS is not suppported after XP. Open Rails installations will allow users to use MSTS assests on modern operating systems.

  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns


Address: UK
All products: Visit Fruugo Shop