JSP Force®8 Half-Mask with PressToCheck™ P3 Dust Filters, Size Medium, Conforms & Complies with safety standards EN 140 / EN 143, Suitable for: Construction, DIY, Water based Paint Spraying

£9.9
FREE Shipping

JSP Force®8 Half-Mask with PressToCheck™ P3 Dust Filters, Size Medium, Conforms & Complies with safety standards EN 140 / EN 143, Suitable for: Construction, DIY, Water based Paint Spraying

JSP Force®8 Half-Mask with PressToCheck™ P3 Dust Filters, Size Medium, Conforms & Complies with safety standards EN 140 / EN 143, Suitable for: Construction, DIY, Water based Paint Spraying

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

Inhale - No air should come through the mask. Adjust the mask and repeat until it doesn't. Release when seal is made.

Reflective strips create increased visibility in low-light environments for added safety. Typhoon™ Exhalation Valve The assembled respirator may not provide a satisfactory face seal with certain physical characteristics (such as beards or large side burns) resulting in leakage between the facepiece and the face, the under assumes all risks of bodily injury which may possibly resultClean the facepiece (excluding filters) using a cloth moistened with a weak detergent solution and allow to air dry in a noncontainated atmosphere Don the Mask - Put the straps and harness over your head and pull the straps to a suitably tight and comfortable fit. PRESS IT!

Respirator components, especially exhalation valve and seat, should be inspected prior to each use. A respirator with any damaged or deteriorated components should be discarded The JSP Force Mask has been designed with comfort in mind, which is why the ultra lightweight harness structure cradles the head. The mask is designed to be lightweight so that you can use the mask over an extended period of time without developing fatigue. As a result, it is one of the lightest face masks on the market. How Safe Is the JSP Force 8 Face Mask? The above table is for guideline purposes only. Before commencing work, you MUST conduct a proper risk assessment and fit test. Don the Mask - Put the straps and harness over your head and pull the straps to a suitably tight and comfortable fit.

Downloads

This mask system is cross-compatible with much of the JSP PPE range, allowing you to wear face shields, ear defenders, goggles, and helmets simultaneously. Do not use for respiratory protection against atmospheric contaminants which have poor warning properties, are unknown or immediately dangerous to life and health or against chemicals which generate high heats of reaction with chemical filters Face-fit - Respiratory protection is only effective if it is correctly selected, fitted and worn throughout the Fit It: Put the straps and harness over your head and pull the straps to a suitably tight and comfortable fit.

Inhale - No air should come through the mask. Adjust the mask and repeat until it doesn't. Release when seal is made. Features & benefitsConforms to EN 140 (Face piece), EN 14387:2004 (Filter performance), EN 143:200 (Filter performance)



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop