Dual Safety 7" Immersion Heater Thermostat

FREE Shipping

Dual Safety 7" Immersion Heater Thermostat

Dual Safety 7" Immersion Heater Thermostat

RRP: £54.99
Price: £27.495
£27.495 FREE Shipping

In stock

We accept the following payment methods


You should only isolate the electric circuit (or fuse) that the immersion heater thermostat is powered by as turning all the power off means the freezer will be off also. 2. Remove the Old Thermostat

Both parts can become faulty and need replacing, but you must confirm you are getting 240v of electricity at the immersion heater before replacing either. Then, you will need to remove the 3 wires using a small flathead screwdriver and pull out the thermostat from the immersion heater. This can be from the fused spur that the immersion heater is wired to, or at the main consumer unit (fuse board) where all the circuit breakers or fuses are. After confirming the thermostat is faulty (with a multimeter) and you have bought a replacement thermostat, it’s time to replace it. Replacing an immersion heater thermostat is a simple job if you understand basic electrics, just be sure to isolate the electric supply properly. An immersion heater element replacement is a whole different ball game. If you are not very competent in plumbing, you should probably hire a plumber to do it.When fully drained, you should be able to shake and slightly move the cylinder. You will be able totell when it’s empty. 2. Remove the Heating Element I have been a full-time plumber for over a decade and I get called out to boiler replacements and repair jobs like this regularly. To remove the heating element from the hot water cylinder you will need an immersion heater spanner.

An immersion heater heats the water in a cylinder (hot water tank), typically on a timer, so you always have hot water when you need it In this post, I’ll go through my processes for replacing immersion heaters thermostats and heating elements. Immersion heater with cable First, you’ll need to drain the water out of the hot water cylinder. Orange hose connected to drain off It could be a fuse or power supply problem causing you to get no hot water from the immersion heater. Immersion Heater Thermostat Replacement

  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns


Address: UK
All products: Visit Fruugo Shop