Aeotec Home Energy Meter Gen5, Z-Wave Plus Smart Electricity Usage Monitor, Report Real Time Power Consumption, 1 Clamp, Detect up to 60 amps for Single Phase System

£54.995
FREE Shipping

Aeotec Home Energy Meter Gen5, Z-Wave Plus Smart Electricity Usage Monitor, Report Real Time Power Consumption, 1 Clamp, Detect up to 60 amps for Single Phase System

Aeotec Home Energy Meter Gen5, Z-Wave Plus Smart Electricity Usage Monitor, Report Real Time Power Consumption, 1 Clamp, Detect up to 60 amps for Single Phase System

RRP: £109.99
Price: £54.995
£54.995 FREE Shipping

In stock

We accept the following payment methods

Description

If the spikes are coming in as valid, that seems to rule out any possibility of corruption in transmission or in the logging process.

If you’d like to say thank you, please consider donating to help support the site and YouTube channel. Monitor consumption of your whole home or generated electricity from solar panels with a one of its kind WiFi-operated energy meter with contactor control functionality. The clamp detects one load / circuit and reports the real-time power consumption to your Z-Wave smart home control gateway.Operating the buttons to set up the unit and change display mode produces quite loud and piercing beeps which could be bad or good. I have used (and therefore only tested) a basic configuration of report clamp 1 in group 1, clamp 2 in group 2, and clamp 3 in group 3. An intermittent grounding of the CT input could create a current spike because the input is grounded when the plug is removed from the emonTx. The user instructions from Aeotec are available here as the settings page is complicated to reflect the plethora of options on which group to report which clamp. At the time of writing, Aeotec do not offer any HEM units that are compatible with Aussie standards.

What I do know is you want to be very very careful poking around in it as it could well still be live! I started testing my new system and put 2 meters (one is the blue from OEM and one 30A model from the same manufacturer) on the same wire to see if they show any difference in measurements. If you have any pre-sales problems, or in use, or development programming problems, you can contact us, we will reply you as soon as possible. This Zigbee Single Clamp Power Meter module ships in a cheap cardboard box, with the module, the 80A CT Clamp, a manual and sticker inside the package.I don’t have much experience with CTs and I found no specific instructions as how to put the meter on the wire. I found that I needed to calibrate the bottom end of the sensor slightly too because it was picking up some interference and reporting about 60 amps when nothing was connected, so my lower end calibration value is actually 0.

I created an extension cable from an old PC power cable, stripped the L-live wire and connected the clamp to it.This device adopts open-loop current transformer, which can be easily connected to the device to be tested. As the amount of generation has gone up, eg to over 600W, the monitor displays more closely/accurately reflected the export number. g. debounce: 1 and a message from a device is received, Zigbee2MQTT will not immediately publish this message but combine it with other messages received in that same second of that device. Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop